Our Ku-Band power divider is used in many satellite monitoring and test equipment and in many communication systems for the defense industry. They are also used for combining powers in power amplifiers. Built upon Wilkinson power divider theory, they have low insertion loss, and exhibit high isolation between ports.
Ku Band Power Divider Elite’s compact, rugged power divider is designed as an economical hot-standby solution for TVRO applications where reception continuity is essential. The divider simply fits to any feed with a standard WR75 (WG17) flange and will accommodate two standard size LNBs side by side.
A Ku-band Substrate Integrated Waveguide power divider is proposed. In this work, the SIW power divider is designed with T-junction configuration. The SIW technique enables the power divider to have low insertion loss, low cost and features uniplanar circuit.
KU-band Splitter / Divider / Combiner. ETL RF power dividers / power splitters or RF power combiners are available in 2, 3, 4 and 8 way capacities covering the KU-band frequency range (10,000 – 15,000 MHz). The passive splitters / passive combiners are provided.
Ku Band Power Divider Our compact, rugged power divider is designed as an economical hot-standby solution for TVRO applications where reception continuity is essential. The divider simply fits to any feed with a standard WR75 (WG17) flange and will accommodate two standard size LNBs side by side.
This paper presents a Ku-band compact Wilkinson power divider (WPD). The proposed WPD is realized by a multi-tap inductor with shunt capacitors to achieve low insertion loss, broadband isolation while minimizing chip area. Occupying only 188 × 116 ?m 2, the proposed WPD achieves a measured insertion loss of less than 1 dB from 1 to 16 GHz. From 11 to 16 GHz, the measured isolation is better than 20.
1/20/2005 · The design, fabrication, and experimental evaluation of a Ku?Band 3?dB Wilkinson power divider on high?resistivity silicon (HRS) are presented in this paper. The measured insertion for the powder divider is 3.5 dB and the isolation between ports 2 and 3 is 12 dB.
10/12/2020 · Abstract and Figures In this paper, a microstrip circuit structure for a K-Band Wilkinson power divider is presented. The designed power divider is composed of two-step taper stubs based on…
